High Strength Dewatering Screen With Large Processing Capacity
Desciption
This series of products are mainly used for dewatering, desliming and medium removal. They are applicable to washed sand in sand and gravel yards, coal slime recovery in coal preparation plants, tailings dry discharge in beneficiation plants, as well as soil remediation and sewage treatment, etc. They have the characteristics of large processing capacity, high screening efficiency, low moisture content of finished materials and high cost performance.
Technical Detail
| Model | MotorPower(KW) | Production Capacity(t/h) | MAX Feed Size(mm) |
| LZT-1842 | 7.5X2 | 60-130 | ≤10 |
| LZT-2050 | 11X2 | 80-150 | ≤10 |
| LZT-2460 | 15X2 | 100-200 | ≤10 |
| LZT-3060 | 18.5X2 | 120-250 | ≤10 |
Product Avantage
1. Using the combination of motor + bearing seat + coupling as the excitation source, it has strong power, reliable structure, high working frequency, large vibration intensity, low moisture content of products on the screen and high unit processing capacity.
2. The side plates are made of low-alloy structural steel, which has good welding performance and high strength. The connection of the side plates with the cross beams, motor seats and reinforcing plates all uses torsional shear high-strength bolts without welding, avoiding the problem of side plate cracking caused by welding stress.
3. The screen plate is made of imported polyurethane material, which has a high opening rate, good water permeability and a long service life. And rubber springs are selected, which have low noise and good damping effect.
4. The pre-dewatering screen plate is installed at a 45-degree angle to the horizontal, and the dewatering screen plate is installed with a negative inclination angle to increase the dewatering area and promote the materials to be dewatered as soon as possible to form a filter layer.
Company Information
Chongqing Sanming Heavy Industry Co., Ltd. was established in 1994 as a comprehensive equipment manufacturing company that integrates scientific research, production, sales and service. Adhering to the business philosophy of "honesty, pragmatism and innovation", and focusing on the product orientation of "intelligence, high efficiency, energy conservation and environmental protection,” with 30 years of innovative development, Sanming’s products now include stone crusher and screening equipment, casting spare parts, intelligent control systems, and EPC general contracting projects, covering numerous industries such as mining, building materials, highways, railways, bridges, coal, metallurgy and chemical industry. It has become a national high-tech company.
Workshop
Production and Processing Workshop
Finished Product Display Workshop
Project Cases
FAQ
1.Can I have a sample order?
A: Yes.
2.What about the leading time ?
A: 15 working days.
3.Do you have any MOQ limit ?
A: MOQ is 1 set.
4.Can you provide OEM and ODM services?
A: Yes.
5.Will you provide pre-sale services ?
A: Yes. SAMYHI consists of experienced specialists, we will offer a suitable solution according client's requirement in time.
6.Is our after-sales service excellent ?
A: Yes.SAMYHI's skilled technicians are available to assist with onsite installation,commissioning & training on request.
7.Will we provide technical support ?
A: SAMYHI provides enough hardware resource especially for large-scale production lines, clients can carry out installation, commissioning and acceptance before delivery.
Warmly welcome to visit us
Technical Detail
| Model | MotorPower(KW) | Processing Capacity | Feed Granularity(mm) | Groove specification |
| ZSW-350*110 | 22 | 200-450 | 600 | 3500x1100 |
| ZSW400*130 | 30 | 200-450 | 700 | 4000x1300 |
| ZSW-D500-150 | 37 | 300-500 | 800 | 5000x1500 |
| ZSW-D600-170 | 45 | 400-800 | 1000 | 6000X1700 |
Product Avantage
1. The feeding box is made of low-alloy special materials and has a fully riveted structure, which can bear greater loads and is not easy to deform or break.
2. The stepped bar design is not easy to block materials and has a good pre-screening effect.
3. The frequency is adjusted by the frequency converter controller to facilitate the constant feeding amount of the coarse crushing equipment.
4. Strong exciting force. The transmission main shaft adopts a large eccentricity, and the two eccentric shafts form the best resultant force through angle adjustment to achieve the best feeding effect.
5. The thin oil external circulation lubrication structure is adopted to extend the service life of the bearings. The oil tank is provided with exhaust holes and observation holes to detect that the oil temperature does not exceed the limit.
6. The mud leakage part of the feeding trough can be set according to user needs, and the functions of mud leakage and no mud leakage can be interchanged.
Company Information
Chongqing Sanming Heavy Industry Co., Ltd. was established in 1994 as a comprehensive equipment manufacturing company that integrates scientific research, production, sales and service. Adhering to the business philosophy of "honesty, pragmatism and innovation", and focusing on the product orientation of "intelligence, high efficiency, energy conservation and environmental protection,” with 30 years of innovative development, Sanming’s products now include stone crusher and screening equipment, casting spare parts, intelligent control systems, and EPC general contracting projects, covering numerous industries such as mining, building materials, highways, railways, bridges, coal, metallurgy and chemical industry. It has become a national high-tech company.
| Model | MotorPower(KW) | Processing Capacity | Feed Granularity(mm) | Groove specification |
| ZSW-350*110 | 22 | 200-450 | 600 | 3500x1100 |
| ZSW400*130 | 30 | 200-450 | 700 | 4000x1300 |
| ZSW-D500-150 | 37 | 300-500 | 800 | 5000x1500 |
| ZSW-D600-170 | 45 | 400-800 | 1000 | 6000X1700 |
Workshop
Production and Processing Workshop
Finished Product Display Workshop
Project Cases
FAQ
1.Can I have a sample order?
A: Yes.
2.What about the leading time ?
A: 15 working days.
3.Do you have any MOQ limit ?
A: MOQ is 1 set.
4.Can you provide OEM and ODM services?
A: Yes.
5.Will you provide pre-sale services ?
A: Yes. SAMYHI consists of experienced specialists, we will offer a suitable solution according client's requirement in time.
6.Is our after-sales service excellent ?
A: Yes.SAMYHI's skilled technicians are available to assist with onsite installation,commissioning & training on request.
7.Will we provide technical support ?
A: SAMYHI provides enough hardware resource especially for large-scale production lines, clients can carry out installation, commissioning and acceptance before delivery.
Warmly welcome to visit us
Product Tags:
|
|
High Strength Dewatering Screen With 60-130 m3/h Processing Capacity Images
|
